Jumper Cable

Connecting cable which is used to connect Sensing cable or probes to the panel or the previous sensor. It's bright highly visible yellow colour allows for easy identification in dark environments such as in risers of false floor voids. The cable is LSF (Low Smoke and Fume) and can be installed within most environments.

Mapping Tags

Small plastic card which are used to identify the sensing cable to confirm the correct zone and location. These tags are fixed to the sensing circuit with a small cable tie at approximately 3 Metre intervals.

Hold Down Clips

Self adhesive clips which can be used to secure either sensing cables or jumper cables in position. With the use of a primer spay these clips can also be used to adhere to concrete or other dusty surfaces.