Maintenance Commissioning Installation Supply Design Repair

Mini Plate Sensor

Mini Plate Sensor
Mini Plate Sensor
Brand: Aquentis
Product Code: WD-MPS-1
Reward Points: 0
Availability: In Stock
Price: £34.80
Ex Tax: £29.00
   - OR -   

The Mini Plate Sensor is a small compact probe which will detect all conductive liquids. The entire underside is a detection surface which is suspended 2mm above the mounting surface by 4 stabilisers, this stops the detection surface contacting the floor allowing the sensor to be mounted on metal surfaces such as Drip Trays or Air Handling Units. The surface clearance can be reduced from 2mm to just 1mm by removing the stabilisers centre pin.

The units are designed to work in either horizontal plane. Facing down it is used as a robust sensor where water is likely to pool such as in drip trays or non porous floors, and because of it’s size it is also usable within confined ceiling voids. Facing upwards the unique sloping face can be sited below valves or other probable sources of leaks to provide early warning. The sloping face allows the water to “drain off” quickly so that pooling doesn’t occur allowing the controlling equipment to reset as soon as is practical.

Because of it's small size it is ideally suited to incorporation in equipment and locations where other detection devices cannot be accommodated.

The unit has a low centre of gravity which means that it can be placed in position without fixing with little fear that it will topple over.

The Sensor is fully sealed allowing the unit to be quickly returned to service even after complete submersion.


  • Bunded area's
  • Drip trays


  • Sloped case design allows the sensing surface to face upwards allowing placement under pipe joints, valves ect.
  • Can be placed on metal surfaces such as Drip Trays
  • Small and stable design allows placement without the need for fixing
  • Reliably senses the presence of any conductive fluid
  • Durable construction


  • Sensor compatibility:   Aquentis LDM.
  • Colour:   Black
  • Operating Conditions:   32° to 167°F (0° to 75°C) 5% to 95% RH, non-condensing
  • Weight:   30g
  • Dimensions:   


Only suitable for LDM Leak Detection Modules

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

aquentis Limited 2011