Maintenance Commissioning Installation Supply Design Repair

Water Detection Sensing Cable 10 Metres

Water Detection Sensing Cable 10 Metres
Water Detection Sensing Cable 10 Metres
Product Code: WD-HW-10M
Reward Points: 0
Availability: Out Of Stock
Price: £111.60
Ex Tax: £93.00
   - OR -   

With technology growing at an unprecedented rate the need to protect the supporting infrastructure has never been greater. Many individuals and companies protect from fire but in the UK more property is damaged by water than fire. A Liquid Leak Detection system from Aquentis can provide early warning of a leak long before it reaches your critical infrastructure such as power and data.

Linear leak detection is provided by moisture sensitive leak detection cables, that are connected to the control panel via the Zone Connection Box using a simple two core leader cable, making installation quick and inexpensive.

The Water Detection Sensing cable is a flexible cable which continuously monitors for leaks along it's entire length, large areas can easily be covered by simply plugging additional lengths together. The Sensing cable is ideal for area's where no water leaks should be present and is particularly suited to shadowing pipe runs.

When even a small amount of water comes into contact with the sensor it is absorbed by capillary action thereby triggering the alarm. After the source of the leak has been cleared the Sensing Cable should dry out, normally in around 20 minutes the panel can then be reset and the system is active again. Unplugging or cutting the Hydrowire will be immediately be indicated on the control panel by the line fault indicator for the particular zone in question illuminating and the fault sounder on the panel activating. Each zone requires a Zone Connection Box and an end of line plug Special lengths can be made to order.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

aquentis Limited 2011