• buildings-slim

TT1000 Water Sensing Cable

TraceTek TT1000 Water Sensing Cable

TraceTek TT1000 Water Sensing Cable Connectors

Information

Part #’s:
TT1000-1M/3FT-PC     409271-000
TT1000-3M/10FT-PC     391887-000
TT1000-5M/17FT-PC     072827-000
TT1000-7M/25FT-PC      017859-000
TT1000-15M/50FT-PC     805147-000
TT1000-30M/100FT-PC     396807-000
TT1000-50M/165FT-PC     P000000873

Available: 1996 –

Current model

Supported

Alternative available

Description

TT1000 water leak detection sensing cables are available in a range of fixed lengths with plastic connectors. TT1000 detects the presence of water at any point along its length and if connected to the TraceTek TTDM or other Longline panels or SIM’s can show the actual location of the contact with the water in either Feet or Metres.

TT1000 sensing cable is mechanically strong and resistant to corrosion and abrasion. The cable is constructed of two sensing wires, an alarm signal wire, and a continuity wire embedded in a flame resistant high visibility yellow fluoropolymer smooth carrier rod allowing it to be quickly dried and returned to service.

TraceTek’s advanced cable design leaves virtually no place to trap moisture and contaminants giving an operational advantage over other water detection cables that use an over braided construction.

Note: TT1000 Water Detection Cables can be Identified by their sealed connectors as shown. There are other systems which use a similar design of sensing cable with a range of different connectors.

Downloads

 TraceTek TT1000 Data sheet (2002)