Description
The Aquentis Remote Alarm Indicator has been designed for easy connection to the majority of alarm panels available today. By simply connecting to the clean volt-free normally open contacts which close on alarm the ALD-RAI warns when there is an alarm condition on the monitored module or panel.
The ALD-RAI has been designed to be a simple Remote Alarm indicator which can be located in both domestic and commercial environments. The unit is designed to harmonise with standard UK electrical accessories and can be fitted to a standard 35mm deep single gang surface, flush or plasterboard back box as well as Dado trunking frames.
The Remote Alarm Indicator simply connects to the clean volt-free normally open contacts that close on alarm at the monitored module or panel.
Typical installation of ALD-RAI is carried out using a 4 core flexible cable which allows the power supply to the unit to be fed from the remote location. If a power supply is to be sited close to the Remote Alarm Indicator, only a 2 core cable is needed from the monitored equipment.
Suitable Aquentis cables are:
4 Core CAEA-JC4
2 Core CAEA-JC2