TraceTek Modular Jumper Cable

TraceTek Modular Jumper Cable

£55.20£81.60 Excl. Tax: £46.00-£56.67

Aquentis TraceTek compatible Modular Jumper cables provide  a convenient and quick solution where a non-sensing link is needed between sensing cable to sensing cable or from Leader cable to first sensing cable.

This item is TraceTek™ compatible, it is neither manufactured nor endorsed by TraceTek™
TraceTek™ is a registered trademark of nVent Thermal Management.

 

Clear

Product Description

The Aquentis TraceTek Modular Jumper cable is used to connect TraceTek water detection sensing cables together through locations that do not require leak detection. They can also be used between the Leader cable and the first sensing cable where the leader cable is not long enough.

Available in a range of lengths the Modular jumper cables simply plug together to provide the required length. This modular approach provides a convenient and site friendly method to build up the TraceTek sensing circuit. Manufactured using a High Visibility Yellow Low Smoke Zero Halogen (LSZH) UV stable material allows them to be installed within false floor or ceiling voids as well as external cable run’s.

 

Additional Information

Length

1 Metre, 3 Metres, 5 Metres, 10 Metres, 15 Metres, 20 Metres, 25 Metres

Specification

Cable diameter ~4.9 / 5.2 mm
Conductors Annealed copper Tin coated copper Strand 16 x 0.20 (0.5mm2)
Colour Of Cores Green, Yellow, Black, Red
Outer Sheath / Jacket Material XLPE LSZH <IEC60332>
Colour Yellow
Voltage Rating Withstand / voltage rating 300v
Connector diameter 26mm

This item is TraceTek™ compatible, it is neither manufactured nor endorsed by TraceTek™
TraceTek™ is a registered trademark of nVent Thermal Management.