Water Leak Detection Mapping Tags

Water Leak Detection Mapping Tags

£2.16£31.80 Excl. Tax: £1.80-£22.08

Use Aquentis Mapping Tag’s to mark the location of Water Leak Detection Jumper and Sensor cables.

Equivalent Part Numbers:

TT-TAG
LD-TAG
AT-TAG
ES-EC

Clear

Product Description

Aquentis ALD-MAP Mapping Tags are small plastic tags that are attached to Modular Jumper Cables and Water Detection Sensing Cables. They are used to clearly identify the cable as part of the water detection system. Each tag has a panel to mark the zone number, circuit reference or in the case of TraceTek systems the Metreage reading.

Mapping Tags are normally fixed at 3 Metre intervals on sensor cables and 5 Metres on interconnecting cables and at every change of direction or level.

Mapping Tags application

Tags can be used to identify which panel or Leak Detection Module the cable is connected to. This is useful if sensors from several water detection panels are in the same area. Tags are also used to warn that the non-sensing cables such as Jumpers and Leaders are part of the Leak Detection system. Each tag is permanently attached to the sensor or jumper cable with the cable tie provided.

Additional Information

Pack Size

3 Tags, 6 Tags, 12 Tags, 24 Tags, 48 Tags